Blog

Breakdown Service Like No Other

Another Emergency Breakdown covered this weekend and helped keep the power on down south!

Richard was only to happy to help out a contractor in dire needs of custom made Fasteners to be produced there and then and shipped down to London on what’s known industry wide as “Taxi Service” Quoted, Produced and Delivered in under 12 Hours 👌🏻

💪🏻 #breakdowns #samedayservice #specialists #wontletyoudown #weekendsareforworking #weneverstop 🔩


Share this:

In House Mods

In House Modifications on a Friday 🔩

Our customer came looking for some M12x12 Socket Head Cap Screws in A2 Stainless Steel and with the quantity being required only 10 getting them manufactured would prove tricky due the size not being a common standard…

Not a problem for John who very kindly modified some longer Socket Caps and Chamfered them in under an hour and our Customer was delighted and got the project boxed off on time 😎

#fasteners#modifications#inhouse#a2stainlesssteel#socketcaps#fridayfunday#everydayssaBokaday


Share this:

– DIN 2510 – Type L – Material 1.7711 –

We have been tasked with finding some replacements for these DIN 2510 Type L Studs in Material 1.7711 for an urgent job and had until Friday to get them sorted…

Long story short they’re sorted 😎

Oddball Enquiries are where we come into our own & excel 👌🏻 Will post the new studs when they arrive  #studs #fasteners #runcorn #widnes #cheshire #specialrequirement #nonstandardisourstandard

Share this:

PLEASE READ THE FOLLOWING UPDATE:

*** SERVICE UPDATE ***
Please read the attached notice for Important Information regarding trading from 5/10/2020.
Due to staffing levels being low, all orders MUST be placed over the phone / via email well in advance to allow time to pick, pack and process for the staff at the depot.
We will trade as normal as best we can but please be patient with only one full time member of staff accompanied by our apprentices available next week we will be slower than usual at replying but rest assured we will be back in touch and will get everything sorted for you as per 👌😁🔩

Share this:

TGI Friday!!!

Another busy day at Boka HQ!

Everything left as it should, all promises kept & everything fastened together quite nicely 👌🏻 ( Excuse the pun )

One of close friends at a vehicle manufacturers came to us last minute desperate for a very specific sized J-Hook or Hook Bolt that aren’t commonly kept by many suppliers, luckily we had something a little longer that we were able to modify and it di the job.

From an M6x150 cut down, re threaded and chamfered to M6x75 complete with Eye Hooks, Penny Washers & Nyloc Nuts we got the job done 👍🏻

Remember we now offer some in house modifications to most common Fasteners, give us a try and get in touch via:

Phone – 01928 590440 / Fax – 01928 590400 or Email @ sales@bokabolts.co.uk 🔩 www.bokabolts.co.uk

Share this:

Fine Pitch Engineer Studs

Big Thank You to our Sister Company Smith Bullough for producing these High Tensile Fine Pitch Engineer Studs.

Specs: M16 x 90 x 1.5p – Threaded 20mm one end & 40mm the other with a 30mm Shank / Blank to ensure they sit correctly 🔩

Turned around quickly & produced to a high quality!

Get in touch today for your manufacturing enquiries:

Tel: 01928 590440 – Fax: 01928 590400 – Email: sales@bokabolts.co.uk

Visit: www.bokabolts.co.uk

662 SharesLikeCommentShare

Share this:

Large Stock’s of B7 Held @ Boka Bolt Supplies

B7 ASTM A193 Studbolts are a commonly used Fastener yet not that many distributors / merchants keep a large range in stock for urgent supply.

ASTM A193 defines both SI (Metric) and inch-pound units. Grade B7 is a heat-treated chromium-molybdenum low-alloy steel with minimum tensile strength requirement of 125 ksi (860 Mpa), yield 105 ksi (720 Mpa), and maximum hardness of 35HRC.

We pride ourselves on our stock levels on Standard & Non Standard Fasteners & our rapid turnaround times 🔩

Call Us: 01928 590440 / Fax Us: 01928 590400 / Email Us: sales@bokabolts.co.uk or visit us @ www.bokabolts.co.uk

Share this:

Stud Cutting Service

Cut Stud now readily available from the Runcorn Depot 👌🏻

Offering a 24H Turnaround when possible for Chamfered All thread Studs, Nuts & Washers in standard materials & grades 😎

For a small job or one off stud then give us a shout & see what we’re all about 😉

Call us: 01928 590440 Fax Us: 01928 590400 or Email us: sales@bokabolts.co.uk & finally visit us in more depth @ www.bokabolts.co.uk🔩

Share this:

Deals ? Savings? Bargains?

Yes. Absolutely. In fact we have quite a few of them of late with more to be added just like these 2 👇

Keep those eyes peeled for more offers heading you’re way over the next week or so & why not take part in the giveaway for September?

Its free, you could win a free prize & well there’s not much more to add really 🤷‍♂️😉

Call Us: 01928 590440 – Email: sales@bokabolts.co.uk or Visit: www.bokabolts.co.uk🔩

Share this:

September Giveaway

The Giveaway Returns 👌

The lads at Boka wanted to give a bit back and all opted to bring back the Monthly Giveaway for September 2020…

Always fantastic items to be won and after all its free!

All you have to do is LIKE this post, SHARE the post on our Facebook Page & simply comment DONE to receive you’re number for the end of month raffle – SIMPLES 🤷‍♂️

Check out what the chaps have picked for the September Prize & the rest ? Well that’s up to you now isn’t it 😉🔩

Share this:

Boka Bolts Pays A Visit To Smith Bullough

Dan visited our sister company Smith Bullough earlier this week to have a long overdue catch up and see some of the machinery added whilst gaining a better understanding of the manufacturing processes involved in our industry!

Safe to say the setup is pretty impressive with some unique & high quality end products coming out of the works…

For your manufacturing enquiries get in touch @ sales@bokabolts.co.uk or call us on 01928 590440 & get things moving today!

Take a look at some of the unique capabilities whether its heavy duty like the Tree House Bolts we had made or down to the delicate processes involved in producing Titanium Socket Cap Screws

Share this:

Covid19 Trading Update

From the 24th July 2020, Government Guidelines state that any person wishing to enter a retail establishment has to wear a Face Mask / Covering or risk being fined up to £100 & being refused service.

We will be supporting the Government & the people of the UK by upholding this with very few exceptions.

If you do not have a Face Mask / Covering please make us aware prior to entering the store by calling 01928 590440 as we have them for sale and will safely leave one outside for you prior to you entering the Trade Counter. This is chargeable and not free sadly.

Thank you for your continued support and understanding throughout the whole of 2020 & if we all do our part, we will come out stronger 💪🔩

📞 01928 590440 ⌨️ sales@bokabolts.co.uk 💻 www.bokabolts.co.uk 🔩

Share this:

Trade Counter Refresh

Completed at the start of the Lockdown we took on the challenge of bringing our counter back to life a little bit and are impressed with our updated look and shiny floor!

The Counter is now back open to Trade & Public with some limitations an restrictions in place ( Signs on the front door ) and we are hoping to see you soon!

Take Care & Be Safe!

Share this:

*** WEEKLY UPDATE ***

Boka Bolt Supplies continue to monitor the outbreak of the Covid-19 (Coronavirus). We are following the Government guidelines to protect our staff’s health while trying to maintain our outstanding service to you, our customers.

From Wednesday 13/5/2020 we will be re-opening our Trade Counter to customers & reinstating our delivery service.

We still advise to use the following process when & where possible to avoid coming into contact & risk spreading the virus.

Placing your orders:

1. To place your order you can either Call / Email your order through and wait for a call back so we can arrange payment with our sales team.

2. Inform our sales team when you require your items allowing us appropriate time to prepare your order & order in any large quantities / special requirements.

3. When collecting please be aware of the government guidelines, staying two metres away from staff and remain within our cordoned zones.

4. Our contact form is still live and being monitored constantly: https://www.bokabolts.co.uk/contact/

All enquiries sent through the contact form will be looked at and responded to as quickly as possible by the guys who remain at the Runcorn Site.

If you have any enquiries, we can be reached via:

Email: sales@bokabolts.co.uk / Email: dan@bokabolts.co.uk / Tel: 01928 590 440

It may take a little longer than usual to answer your enquiries, again we ask for your patience in this matter.

For more upto date news on Covid19 / Coronavirus please visit the following page go upto date Government Advise & Guidelines:

https://www.gov.uk/government/latest?topical_events%5B%5D=coronavirus-covid-19-uk-government-response

Share this:

Trading Update – 1/5/2020

Boka Bolt Supplies continue to monitor the outbreak of the Covid-19 (Coronavirus). We are following the Government guidelines in order to protect our staff’s health while trying to maintain our outstanding service to you, our customers. 

Placing your orders:
1. To place your order you can either Call / Email your order through and wait for a callback so we can arrange payment with our sales team.
Tel: 01928 590 440 – Email: sales@bokabolts.co.uk


2. Inform our sales team when you require your items allowing us appropriate time to prepare your order & order in any large quantities / special requirements.

3. When collecting please be aware of the government guidelines, staying two metres away from staff and remain within our cordoned zones.

4. Our contact form is still live and being monitored constantly
https://www.bokabolts.co.uk/contact/
All enquiries sent through the contact form will be looked over and responded to as quickly as possible by the guys who remain at the Runcorn Site.

If you have any enquiries, we can be reached via our email address: sales@bokabolts.co.uk or alternatively  dan@bokabolts.co.uk – Depot Manager.


It may take a little longer than usual to answer your enquiries, again we ask for your patience in this matter.

Share this:

COVID-19: Boka Bolts are still open for business

Boka Bolt Supplies continue to monitor the outbreak of the COVID-19 (Coronavirus).

We are following the Government guidelines in order to protect our staff’s health while trying to maintain our outstanding service to you, our customers.

Placing your orders:

At present our Sales Team are available over the phone until further notice on 01928 590440, however some members of staff are now working from home which could affect our response. We ask for your patience in this matter.

If you have any enquiries, we can be reached via our email address:

sales@bokabolts.co.uk

It may take a little longer than usual to answer your enquiries, again we ask for your patience in this matter.

Strict changes, and Government Guidelines have been put into place to protect our staff and to keep up the day to day running of our business.

In this difficult situation, we would like to highlight that we are very proud of all our staff at Boka Bolts who are working hard to ensure that our service continues to our customers during this challenging period.

We thank you for your understanding and support and would like to take this opportunity to wish you all good health. Take care of yourself and others.

Share this:

Still Here

Don’t panic we’re still here!!!

We have just been sorting orders out and sorting new stock out 😁

Also dealing with oddball enquire it’s like this one:

M10 x 1.0p x 30mm Socket Caps 12.9 Torx Head

Our customer couldn’t get them anywhere no matter how hard he tried but we managed to help him out and have them landing Monday Morning 👌🏻

Remember Non Standard Is Our Standard 🔩

📞 01928 590440 ⌨️ sales@bokabolts.co.uk 💻 www.bokabolts.co.uk 🔩

Share this:

Episode III – Return of the Giveaway

*** The Giveaway is back ***

Hope were all refreshed after a nice break over the festive period 😁

Here we have the latest of Boka Bolts Giveaways…

Different to the last few in terms of type of prize but you cant turn up with all your fancy tools wearing your uniform from 1983 can you ?!?!?!

Like, Share & Comment to be in with a chance of winning 👌🔩

Share this:

December Giveaway Winner

Here is our winner Rob Evans looking happy with his prize 😁

We are loving these giveaways & will continue in the New Year, plenty of time for the guys to figure out what we should give away next month!

Enjoy the weekend people, we are open Monday 9am-1pm then were closed until the 2/1/19 @ 8am…

Share this:

Christmas Hours

*** Christmas / New Years Hours ***


Hi Guys, we just wanted to confirm our opening hours for the festive period !!!


They are as follows:
Monday 23rd December – 9am – 1pm ( Closed for Christmas )
Thursday 2nd January 2020 – 8am-5pm

Friday 3rd January 2020 – 8am-4pm
Monday 6th January 2020 Normal Service Resumed 🔩

Share this: